1#@!#!123s

��JFIF�� 1#@!#!123s
: / proc / self / root / usr / share / doc / yum-3.4.3 /
Filename : PLUGINS
back
== Introduction ==
Yum has a simple but powerful plugin architecture which allows external modules
to add new features and/or modify Yum's behaviour. Yum plugins are Python module
s (.py files) which are loaded when Yum starts.

Plugins were created partially as a place to put functionality that was seen as
either less common or undesirable for the main yum package.  Functionality in pl
ugins will generally not be moved or included in the core yum package.

This document explains how to create plugins for Yum. See the {{{ yum(8) }}} and
 {{{ yum.conf(5) }}} man pages for information on how to install and configure p
re-existing plugins.


== A Basic Plugin ==
The following example shows a minimal Yum plugin::
{{{
#!python numbering=off
from yum.plugins import PluginYumExit, TYPE_CORE, TYPE_INTERACTIVE

requires_api_version = '2.3'
plugin_type = (TYPE_CORE, TYPE_INTERACTIVE)

def init_hook(conduit):
    conduit.info(2, 'Hello world')

def postreposetup_hook(conduit):
    raise PluginYumExit('Goodbye')
}}}

This plugin will display "Hello world" as it loads and then will cause Yum to qu
it with a "Goodbye" message once it has finished initialising its repositories.

== Slots and Hooks ==
Plugins integrate with Yum by registering a 'hook' function that corresponds to
a given 'slot'. A slot is simply a point in Yum's execution. All plugin hook fun
ctions for a given slot are called as Yum reaches that slot.

Registration of hook functions is automatic. The plugin module is inspected for
functions named {{{ <slotname>_hook }}}. If a function matching a valid slot nam
e is found then that function is automatically registered as a hook function.

Hook functions all take one argument, for a {{{ conduit }}} instance. Conduits a
re explained below.

The following slots exist:
{{{
config
    Called first as plugins are initialised. Plugins that need to extend Yum's
    configuration files or command line options should do so during this slot.

postconfig
    Called immediately after Yum's config object is initialised. Useful for
    extending variables or modifying items in the config, for example the
    $ variables that are used in repo configuration.
    Note: Only available in yum 3.1.7 or later

init
    Called early in Yum's initialisation. May be used for general plugin
    related initialisation.

predownload
    Called just before Yum starts downloads of packages. Plugins may access
    information about the packages to be downloaded here.

postdownload
    Called just after Yum finishes package downloads. Plugins may access
    error information about the packages just downloaded.

prereposetup
    Called just before Yum initialises its repository information.

postreposetup
    Called just after Yum initialises its repository information.

exclude
    Called after package inclusion and exclusions are processed. Plugins
    may modify package exclusions here.

preresolve
    Called before Yum begins package resolution.

postresolve
    Called just after Yum finishes package resolution.

pretrans
    Called before Yum begins the RPM update transation.

posttrans
    Called just after Yum has finished the RPM update transation.

close
    Called as Yum is performing a normal exit. Plugins may wish to
    perform cleanup functions here.

clean
    Called during Yum's cleanup.  This slot will be executed when Yum
    is run with the parameters 'clean all' or 'clean plugins'.
}}}

== Conduits ==
An object known as a conduit is passed into hook functions when they are called.
 This object provides methods and attributes that should be used for all interac
tion that the plugin has with the rest of Yum.

The conduit varies depending on the plugin slot. Different methods and attribute
s are available as appropriate for the slot. See the {{{ yum.plugins.SLOT_TO_CON
DUIT }}} dictionary for details on the conduit class used for a particular slot.
  All conduits are subclassed from the {{{ PluginConduit }}} class.

== API Dependencies ==
The plugin API and general Yum API are subject to change. For this reason, plugi
ns must state which API they were written for via the {{{ requires_api_version }
}} attribute. Yum will exit with a useful error if it tries to load the plugin w
hich is not compatible with its API version.

In general, a plugin author should set {{{ requires_api_version }}} to the API v
ersion at the time that the plugin is written. The current API version can be fo
und at {{{ yum.plugins.API_VERSION }}}.

The {{{ yum.plugins }}} module documents how the API version is incremented and
the rules for compatibility tests.

== Plugin Types ==
Plugins must advertise what type of plugin they are via the {{{ plugin_type }}}
tuple. The advertised type(s) can be used by software using the Yum libraries to
 control the types of plugins that will be loaded. Yum itself will always load a
ll types of plugins.

A plugin may have more than one type. Two plugin types currently exist.

{{{
TYPE_CORE
    A core plugin modifies Yum's base functionality. For example, a core plugin
might modify
    package exclusions, dependency resolving or repository loading.

TYPE_INTERACTIVE
    An interative plugin may modify Yum's user interface flow. For example, a TY
PE_INTERACTIVE
    plugin might terminate Yum early in some conditions or output extra informat
ion to the user.

    In Yum versions 2.6.x and earlier (plugin API version < 2.3) this constant w
as called
    TYPE_INTERFACE. The purpose of TYPE_INTERFACE is the same as TYPE_INTERACTIV
E
    but the meaning of the old name wasn't clear and so it has been deprecated.
}}}

== Stopping Yum ==
A plugin may stop Yum's execution at any point by raising the {{{ yum.plugins.Pl
uginYumExit }}} exception. The argument of the exception will be displayed to th
e user as Yum terminates.

== Reading Private Plugin Options ==
Each plugin has its own configuration file in {{{ /etc/yum/pluginconf.d/ }}}. Th
ese configuration files follow standard INI file conventions like Yum's own conf
iguration files. Arbitrary options can be read from a plugin's configuration fil
e at any time by using the following methods. These are available on any conduit
 instance:

{{{
    #!python numbering=off
    def confString(self, section, opt, default=None)

    def confInt(self, section, opt, default=None)

    def confFloat(self, section, opt, default=None)

    def confBool(self, section, opt, default=None)
}}}

If the option is missing from the configuration file then the default value pass
ed to method will be returned. See {{{ yum.plugins }}} for more documentation on
 these methods and see the {{{ yum(8) }}} and {{{ yum.conf(5) }}} man pages for
general information on plugin configuration files.

== Extending Yum's Configuration Options ==

In addition to having their own configuration file, plugins may modify the
options available in Yum's own configuration files. A plugin can add new
options or modify the existing options by modifying the {{{ YumConf }}} and
{{{ RepoConf }}} classes defined in {{{ yum.config }}}.

The {{{ YumConf }}} class defines options that are available in the {{{ [main] }
}}
section of {{{ yum.conf }}}. The {{{ RepoConf }}} class defines options that are
available in each repository sections of Yum's configuration file(s).
Modifications to {{{ YumConf }}} and {{{ RepoConf }}} should occur in the {{{ co
nfig }}}
slot.

Here is a simple example of how options can be added to Yum's configuration
files.

{{{
#!python numbering=off
from yum import config
from yum.plugins import TYPE_INTERACTIVE

requires_api_version = '2.4'
plugin_type = (TYPE_INTERACTIVE,)

def config_hook(conduit):
    # Add a boolean option to the [main] section
    config.YumConf.enable_foo = config.BoolOption(False)

    # Add a URL option to repository sections
    config.RepoConf.foo_url = config.UrlOption()

    # Add an option to to [main] and the repository sections. The
    # repository options will inherit the properties of the [main] option
    # and will use the value from [main] if the option is not specified in
    # the repo section.
    config.YumConf.max_foo = config.IntOption(10)
    config.RepoConf.max_foo = config.Inherit(config.YumConf.max_foo)

def init_hook(conduit):
    conf = conduit.getConf()


    # Display the options from the [main] section
    conduit.info(2, "enable_foo = %r" % conf.enable_foo)
    conduit.info(2, "max_foo = %r" % conf.max_foo)

    # Display the options from the repository sections
    for repo in conduit.getRepos().listEnabled():
        conduit.info(2, "%s.foo_url = %r" % (repo.id, repo.foo_url))
        conduit.info(2, "%s.max_foo = %r" % (repo.id, repo.max_foo))
}}}

Note how different types of options are defined ({{{ IntOption }}}, {{{ UrlOptio
n }}},
{{{ BoolOption }}}). A wide variety of option types are available in
{{{ yum.config }}}. It is even possible for plugins to define their own option
types by subclassing {{{ Option }}} if the existing types aren't sufficient. See
the source code for the {{{ yum.config }}} module for further details.

== Extending Yum's Configuration Options (pre Yum 2.9.x, deprecated) ==
In addition to having their own configuration file, plugins may add extra option
s to Yum's main configuration files. A plugin must register new options in the {
{{ config }}} slot using the {{{ registerOpt() }}} conduit method:
{{{
#!python numbering=off
    registerOpt(name, valuetype, where, default)
}}}
where the arguments are...
{{{
name
    The name of the new option.

valuetype
    The type of the option. Valid values are PLUG_OPT_STRING, PLUG_OPT_INT,
    PLUG_OPT_FLOAT and PLUG_OPT_BOOL (defined in yum.constants). The value
    returned for the option will be automatically parsed according to the type.

where
    Defines where the option should be available in configuration files. Valid
    values are:

        - PLUG_OPT_WHERE_MAIN: the option only exists in the [main] section
        - PLUG_OPT_WHERE_REPO: the option only exists in repository sections
        - PLUG_OPT_WHERE_ALL: the option exists in both [main] and repository
          sections

default
    The default value returned for the option if it isn't present.
}}}
The option values defined in the {{{ [main] }}} section may be read by calling t
he
{{{ getConf() }}} repository method. The options will be available as attributes
 of the returned object.

New repository options will be available as attributes of the repository objects
 returned via the {{{ getRepos() }}} conduit method.

The following example plugin shows how a custom option may be defined and
read:
{{{
#!python numbering=off
    from yum.constants import *
    from yum.plugins import TYPE_INTERACTIVE

    requires_api_version = '2.3'
    plugin_type = (TYPE_INTERACTIVE,)

    def config_hook(conduit):
        conduit.registerOpt('foo', PLUG_OPT_BOOL, PLUG_OPT_WHERE_ALL, False)

    def init_hook(conduit):
        conduit.info(2, "[main] foo=%r" % conduit.getConf().foo)

    def exclude_hook(conduit):
        for repo in conduit.getRepos().listEnabled():
            conduit.info(2, "[%s] foo=%r" % (repo.id, repo.foo))
}}}

== Extending Yum's Command Line Options ==
A plugin may add extra command line options to Yum. To do this the plugin
should call the {{{ getOptParser() }}} conduit method during the {{{ config }}}
or
{{{ init }}} slot. This will return an {{{ OptionParser }}} instance which the p
lugin
may modify.  See the Python standard library {{{ optparse }}} module documentati
on for information on how to manipulate this object.

The parsed command line options may be read in any slot after the {{{ init }}}
slot. The values returned are as for {{{ OptionParser.parse_args() }}}.

Options added by plugins will show up in Yum's command line help output (ie.
{{{ yum --help }}})

The following plugin demonstrates the addition of new command line options by ad
ding a {{{ --downloadonly }}} option:
{{{
#!python numbering=off
    from yum.plugins import PluginYumExit, TYPE_INTERACTIVE

    requires_api_version = '2.3'
    plugin_type = (TYPE_INTERACTIVE,)

    def config_hook(conduit):
        parser = conduit.getOptParser()
        parser.add_option('', '--downloadonly', dest='dlonly',
                action='store_true', default=False,
                help="don't update, just download")

    def postdownload_hook(conduit):
        opts, commands = conduit.getCmdLine()
        if opts.dlonly:
            raise PluginYumExit('exiting because --downloadonly specified ')
}}}

== More Examples ==
The easiest way to get started writing Yum plugins is to look at some examples.
The yum-utils package contains a number of useful plugins which will act as a
useful starting point. The yum-utils git tree can be viewed here: [http://yum.ba
seurl.org/gitweb/?p=yum-utils.git;a=tree]
----